2025 John Deere 100 Series S140

MoreLess
Limited Time Offer!

Selling Price -$2,499.00

  • Width:48 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • 2025
  • John Deere
  • 100 Series
  • S140
  • Riding
  • Model: 44N677 (M44) | Overhead valve, full-pressure lube, oil filter
  • 16.4 kW (22 hp)
  • 724 cm (44.2 cu in.)
  • V-twin
  • method: Air
  • Cartridge
  • Bendix type
  • delivery: Pulse pump and carburetor
  • Gasoline
  • Mechanical, viewable from seat
  • Transaxle: Hydrostatic, 2-wheel drive
  • Mechanical
  • Single lever with spring-return on choke
  • Sector and pinion with single drag link and tie rod
  • Mower: Electric power take-off (PTO) clutch | Mower attachability: Single belt
  • Internal wet disk
  • 12 V / 300 CCA
  • Regulated, 8 amp
  • 20x8-8
  • 15x6-6
  • Mower: Four
  • Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-5.2 km/h (0-3.2 mph)
  • mounting: CargO Mount™ system
  • Full-length welded steel
  • Two standard, incandescent
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel, diameter: 30.5 cm (12 in.) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 2.7 mm (0.105 in.)
  • Edge™ mower deck: 122 cm (48 in.)
  • 45.7 cm (18 in.) | Uncut circle: 50.8 cm (20 in.)
  • back: 38 cm (15 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1118 mm (44 in.)
  • 1770 mm (69.7 in.)
  • 1242 mm (48.9 in.)
  • with mower: 1544 mm (60.8 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
  • tank: 9.1 L (2.4 U.S. gal.)
  • Maximum: 227 kg (500 lb)
  • 212 kg (468 lb)
  • Transaxle type: TLT200 hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | Fuel tank location: Rear | Transaxle: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Storage: tray with optional cover | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
  • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, not serviceable
  • system type: Spring-assisted hand-grip lever
  • Front axle: Cast-iron front axle, powdered-metal front wheel bushings | Hood material: Molded-in color material reduces sound, will not rust or dent
  • Fender deck: Stamped steel | Mower deck: Stamped steel deck shell | Mower: Steel, 12 gauge
  • Two piece with open-back | suspension: Tilt, two coil springs
  • Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
  • A used warranty may be available. Contact dealer for details.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $2,499.00
  • Buckhannon
  • Pre-Owned
  • 2506590
  • 2025
  • John Deere
  • 100 Series S140
  • 1DXS140ECSS403953
  • Model: 44N677 (M44) | Overhead valve, full-pressure lube, oil filter
  • 22
  • 27
  • mounting: CargO Mount™ system
  • Gasoline
  • Available
  • with mower: 1544 mm (60.8 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1118 mm (44 in.)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.