2020 John Deere X758 60

Selling Price -

$12,999.00

Information

No Description is Available for this Unit

Photos

Highlights

  • $12,999.00
  • Washington
  • Pre-Owned
  • 2020
  • John Deere
  • X758 60
  • 1M0X758AKLM080452
  • Model: 3TNM74F | Overhead valve, Full-pressure lube
  • Diesel
  • Available
  • With Mower: 74 in. (188 cm) | With Mower (deflector raised for storage): 62 in. (157.5 cm) | Without Mower: 47 in. (119.4 cm)
  • Mower cut: () | 54.5 in. (138 cm)

Specifications

  • 2020
  • John Deere
  • X758
  • 60
  • Riding
  • Model: 3TNM74F | Overhead valve, Full-pressure lube
  • 24 hp (17.9 kW)
  • 60.6 cu in. (993 cc)
  • Three, cast-iron liners
  • One lever
  • Liquid
  • Paper dry-type with primary and secondary elements
  • Replaceable suction side 10 micron
  • Diesel
  • Delivery: In-line indirect injection
  • Solenoid shift
  • Mechanical
  • Hydraulic power
  • Mower: Hydraulic clutch, shaft | Mower Attachability: Shaft or AutoConnect
  • Seat: Six-position parallel arm
  • Internal wet disc
  • 18x8.5-10 HDAP
  • 26x12-12 HDAP
  • Mower wheels: Four
  • 500 CCA (12 V)
  • Engine-mounted alternator, regulated, 40 amp
  • Two standard, halogen, 37 W
  • Forward: 0-8.5 mph (0-13.7 km/h) | Reverse: 0-6 mph (0-9.7 km/h)
  • Welded heavy-duty
  • Receiver: front
  • Fuel fill opening: On left fender, 3 in. (7.6 cm) | Fore-aft adjustment: 7 in. (17.8 cm) | Mower deck material: 0.15 in. (3.8 mm) | Mower wheels rotate: 90 degrees for easy mower removal
  • 14 in. (35.6 cm)
  • 25 in. (63.5 cm) | Uncut circle: 28 in. (71.1 cm)
  • Back: 21 in. (53.3 cm)
  • Mower cut: () | 54.5 in. (138 cm)
  • 75 in. (190.5 cm)
  • 55.7 in. (141.5 cm)
  • With Mower: 74 in. (188 cm) | With Mower (deflector raised for storage): 62 in. (157.5 cm) | Without Mower: 47 in. (119.4 cm)
  • Tank: 5.2 U.S. gal. (19.7 L)
  • Bracket:Standard front - holds up to four Quik-Tatch weights, 42 lb (19 kg) | No fuel or mower: 1,032 lb (468 kg)
  • Fuel tank location: Rear | Taillights or reflector: Taillights | Transaxle: K90 hydrostatic integrated with transaxle / Control: Twin Touch™ pedals | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Mower attachability: Drive-over deck
  • Fuel: Gauge on dash | Mower deck material. 9 gauge
  • Front axle: JDM BA8 nodular iron casting | Hood: Noryl GTX902, painted | Stamped steel deck shell
  • Fender. RIM with in-mold paint
  • Two-piece adjustable seat with brand embroidery
  • Handles
  • Fore-aft: While seated, slide rail, 14-position | Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge | Front draft arms: Overcenter
  • Two-function hydraulic
  • Side
  • 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)